[Answer ID: 14183]
Buffalo NAS device cannot be seen on campus network after being configured.
Created 06/01/2012 15:59 | Updated 06/12/2012 14:19
This may be caused by routing issue.
Please try following steps:
- Press and hold the RED INIT(reset) button for about 15 seconds.
This will set the unit to factory defaults. If something was put into the network settings, this will clear it.
- Find the IP address of the Buffalo Technologies NAS Device.
- Enter the IP into the web browser.
- Re-configure NAS device network information.
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.